Не могу устранить ошибку в config.php на 3 шаге установки , заполнил все поля вродь правильно , но вылетает вот такая ошибка -
Error description: mysql_connect() [function.mysql-connect]: Access denied for user 'a5085843'@'localhost' (using password: YES) /home/a5085843/public_html/includes/class_core.php on line 311

Подскажите кто-нибудь как такое устранить...

a5085843

Неплохое название форума)))

3 шаг - соединение с базой данных?
Проверяй правильность заполнения форм в конфиг.пхп

вродь всё правильно заполнил! вот смотрите мой конфиг.пхп

<?php
/*======================================================================*\
|| #################################################################### ||
|| # vBulletin 3.7.2 
|| # ---------------------------------------------------------------- # ||
|| # All PHP code in this file is ©2000-2008 Jelsoft Enterprises Ltd. # ||
|| # This file may not be redistributed in whole or significant part. # ||
|| # ---------------- VBULLETIN IS NOT FREE SOFTWARE ---------------- # ||
|| # http://www.vbulletin.com | http://www.vbulletin.com/license.html # ||
|| #################################################################### ||
\*======================================================================*/

/*-------------------------------------------------------*\
| ****** NOTE REGARDING THE VARIABLES IN THIS FILE ****** |
+---------------------------------------------------------+
| If you get any errors while attempting to connect to    |
| MySQL, you will need to email your webhost because we   |
| cannot tell you the correct values for the variables    |
| in this file.                                           |
\*-------------------------------------------------------*/

    //    ****** DATABASE TYPE ******
    //    This is the type of the database server on which your vBulletin database will be 

located.
    //    Valid options are mysql and mysqli, for slave support add _slave.  Try to use 

mysqli if you are using PHP 5 and MySQL 4.1+
    // for slave options just append _slave to your preferred database type.
$config['Database']['dbtype'] = 'mysql';

    //    ****** DATABASE NAME ******
    //    This is the name of the database where your vBulletin will be located.
    //    This must be created by your webhost.
$config['Database']['dbname'] = 'a5085843';

    //    ****** TABLE PREFIX ******
    //    Prefix that your vBulletin tables have in the database.
$config['Database']['tableprefix'] = '';

    //    ****** TECHNICAL EMAIL ADDRESS ******
    //    If any database errors occur, they will be emailed to the address specified 

here.
    //    Leave this blank to not send any emails when there is a database error.
$config['Database']['technicalemail'] = 'stillshady@eminemisback.net';

    //    ****** FORCE EMPTY SQL MODE ******
    // New versions of MySQL (4.1+) have introduced some behaviors that are
    // incompatible with vBulletin. Setting this value to "true" disables those
    // behaviors. You only need to modify this value if vBulletin recommends it.
$config['Database']['force_sql_mode'] = false;



    //    ****** MASTER DATABASE SERVER NAME AND PORT ******
    //    This is the hostname or IP address and port of the database server.
    //    If you are unsure of what to put here, leave the default values.
$config['MasterServer']['servername'] = 'localhost';
$config['MasterServer']['port'] = 3306;

    //    ****** MASTER DATABASE USERNAME & PASSWORD ******
    //    This is the username and password you use to access MySQL.
    //    These must be obtained through your webhost.
$config['MasterServer']['username'] = 'a5085843';
$config['MasterServer']['password'] = 'мойпароль';

    //    ****** MASTER DATABASE PERSISTENT CONNECTIONS ******
    //    This option allows you to turn persistent connections to MySQL on or off.
    //    The difference in performance is negligible for all but the largest boards.
    //    If you are unsure what this should be, leave it off. (0 = off; 1 = on)
$config['MasterServer']['usepconnect'] = 0;



    //    ****** SLAVE DATABASE CONFIGURATION ******
    //    If you have multiple database backends, this is the information for your slave
    //    server. If you are not 100% sure you need to fill in this information,
    //    do not change any of the values here.
$config['SlaveServer']['servername'] = '';
$config['SlaveServer']['port'] = 3306;
$config['SlaveServer']['username'] = '';
$config['SlaveServer']['password'] = '';
$config['SlaveServer']['usepconnect'] = 0;



    //    ****** PATH TO ADMIN & MODERATOR CONTROL PANELS ******
    //    This setting allows you to change the name of the folders that the admin and
    //    moderator control panels reside in. You may wish to do this for security 

purposes.
    //    Please note that if you change the name of the directory here, you will still 

need
    //    to manually change the name of the directory on the server.
$config['Misc']['admincpdir'] = 'admincp';
$config['Misc']['modcpdir'] = 'modcp';

    //    Prefix that all vBulletin cookies will have
    //    Keep this short and only use numbers and letters, i.e. 1-9 and a-Z
$config['Misc']['cookieprefix'] = 'bb';

    //    ******** FULL PATH TO FORUMS DIRECTORY ******
    //    On a few systems it may be necessary to input the full path to your forums 

directory
    //    for vBulletin to function normally. You can ignore this setting unless vBulletin
    //    tells you to fill this in. Do not include a trailing slash!
    //    Example Unix:
    //      $config['Misc']['forumpath'] = '/home/users/public_html/forums';
    //    Example Win32:
    //      $config['Misc']['forumpath'] = 'c:\program files\apache 

group\apache\htdocs\vb3';
$config['Misc']['forumpath'] = '';



    //    ****** USERS WITH ADMIN LOG VIEWING PERMISSIONS ******
    //    The users specified here will be allowed to view the admin log in the control 

panel.
    //    Users must be specified by *ID number* here. To obtain a user's ID number,
    //    view their profile via the control panel. If this is a new installation, leave
    //    the first user created will have a user ID of 1. Seperate each userid with a 

comma.
$config['SpecialUsers']['canviewadminlog'] = '1';

    //    ****** USERS WITH ADMIN LOG PRUNING PERMISSIONS ******
    //    The users specified here will be allowed to remove ("prune") entries from the 

admin
    //    log. See the above entry for more information on the format.
$config['SpecialUsers']['canpruneadminlog'] = '1';

    //    ****** USERS WITH QUERY RUNNING PERMISSIONS ******
    //    The users specified here will be allowed to run queries from the control panel.
    //    See the above entries for more information on the format.
    //    Please note that the ability to run queries is quite powerful. You may wish
    //    to remove all user IDs from this list for security reasons.
$config['SpecialUsers']['canrunqueries'] = '';

    //    ****** UNDELETABLE / UNALTERABLE USERS ******
    //    The users specified here will not be deletable or alterable from the control 

panel by any users.
    //    To specify more than one user, separate userids with commas.
$config['SpecialUsers']['undeletableusers'] = '';

    //    ****** SUPER ADMINISTRATORS ******
    //    The users specified below will have permission to access the administrator 

permissions
    //    page, which controls the permissions of other administrators
$config['SpecialUsers']['superadministrators'] = '1';

    // ****** DATASTORE CACHE CONFIGURATION *****
    // Here you can configure different methods for caching datastore items.
    // vB_Datastore_Filecache  - to use includes/datastore/datastore_cache.php
    // vB_Datastore_APC - to use APC
    // vB_Datastore_XCache - to use XCache
    // vB_Datastore_Memcached - to use a Memcache server, more configuration below
// $config['Datastore']['class'] = 'vB_Datastore_Filecache';

    // ******** DATASTORE PREFIX ******
    // If you are using a PHP Caching system (APC, XCache, eAccelerator) with more
    // than one set of forums installed on your host, you *may* need to use a prefix
    // so that they do not try to use the same variable within the cache.
    // This works in a similar manner to the database table prefix.
// $config['Datastore']['prefix'] = '';

    // It is also necessary to specify the hostname or IP address and the port the server is 

listening on
/*
$config['Datastore']['class'] = 'vB_Datastore_Memcached';
$i = 0;
// First Server
$i++;
$config['Misc']['memcacheserver'][$i]        = '127.0.0.1';
$config['Misc']['memcacheport'][$i]            = 11211;
$config['Misc']['memcachepersistent'][$i]    = true;
$config['Misc']['memcacheweight'][$i]        = 1;
$config['Misc']['memcachetimeout'][$i]        = 1;
$config['Misc']['memcacheretry_interval'][$i] = 15;
*/

// ****** The following options are only needed in special cases ******

    //    ****** MySQLI OPTIONS *****
    // When using MySQL 4.1+, MySQLi should be used to connect to the database.
    // If you need to set the default connection charset because your database
    // is using a charset other than latin1, you can set the charset here.
    // If you don't set the charset to be the same as your database, you
    // may receive collation errors.  Ignore this setting unless you
    // are sure you need to use it.
// $config['Mysqli']['charset'] = 'utf8';

    //    Optionally, PHP can be instructed to set connection parameters by reading from 

the
    //    file named in 'ini_file'. Please use a full path to the file.
    //    Example:
    //    $config['Mysqli']['ini_file'] = 'c:\program files\MySQL\MySQL Server 

4.1\my.ini';
$config['Mysqli']['ini_file'] = '';

// Image Processing Options
    // Images that exceed either dimension below will not be resized by vBulletin. If you 

need to resize larger images, alter these settings.
$config['Misc']['maxwidth'] = 2592;
$config['Misc']['maxheight'] = 1944;

/*======================================================================*\
|| ####################################################################
|| # 
|| # CVS: $RCSfile$ - $Revision: 26534 $
|| ####################################################################
\*======================================================================*/

// ******** FULL PATH TO FORUMS DIRECTORY ******
// On a few systems it may be necessary to input the full path to your forums

directory
// for vBulletin to function normally. You can ignore this setting unless vBulletin
// tells you to fill this in. Do not include a trailing slash!
// Example Unix:
// $config['Misc']['forumpath'] = '/home/users/public_html/forums';
// Example Win32:
// $config['Misc']['forumpath'] = 'c:\program files\apache

group\apache\htdocs\vb3';
$config['Misc']['forumpath'] = '';

Путь к форуму не указан.

fine,у меня тоже не указан, но всё работает

maJic добавил 17.09.2008 в 20:47
Скорее проверяй имя юзера и пароль

ставил и путь - ничего...
пароль и логин правильные....
есть еще варианты???

ThisIzEminem, если локалхост, то имя юзера - root. Пароль не надо

Fey,

Точнее если форум на твоем компе, то root .) Если хостинг в инете, то там тоже к некоторых случаех localhost

Originally Posted by ThisIzEminem

// ****** DATABASE NAME ****** // This is the name of the database where your vBulletin will be located. // This must be created by your webhost. $config['Database']['dbname'] = 'a5085843';*

*Сюда надо ввести название базы данных.

Originally Posted by ThisIzEminem

// ****** MASTER DATABASE USERNAME & PASSWORD ****** // This is the username and password you use to access MySQL. // These must be obtained through your webhost. $config['MasterServer']['username'] = 'a5085843';* $config['MasterServer']['password'] = 'мойпароль';

*Здесь если в локалке вводишь root, если в инете имя пользователя ххх_mysql. У меня так.

идёшь в админку. создаёшь базу , создаёшь под неё пользователя... и всё вносишь сюда... 100%

Скорее всего используешь логин и пароль для входа в админку хостинга.